| # | Part Number | Material | Description | quantity |
| 1 | 13108011-2 | Gasket sheet | 4 | |
| 2 | 13408044-139 | Wire round, stainless | Stainless steel wire twisted into a ring with a diameter of 0.8 mm, is a ring of wire, circular cross section, ring diameter 1 m | 20 |
| 3 | 13408044-139 | Wire round, stainless | Stainless steel wire twisted into a ring with a diameter of 0.8 mm, is a ring of wire, circular cross section, ring diameter 1 m | 12 |
| 4 | 13408044-139 | Wire round, stainless | Stainless steel wire twisted into a ring with a diameter of 0.8 mm, is a ring of wire, circular cross section, ring diameter 1 m | 2 |
| 5 | 13408044-139 | Wire round, stainless | Stainless steel wire twisted into a ring with a diameter of 0.8 mm, is a ring of wire, circular cross section, ring diameter 1 m | 20 |
| 6 | 13408044-139 | Wire round, stainless | Stainless steel wire twisted into a ring with a diameter of 0.8 mm, is a ring of wire, circular cross section, ring diameter 1 m | 12 |
| 7 | 13408044-139 | Wire round, stainless | Stainless steel wire twisted into a ring with a diameter of 0.8 mm, is a ring of wire, circular cross section, ring diameter 1 m | 2 |
| 8 | 17108001-143 | Gasket sheet | 8 | |
| 9 | 1851523-1 | Nipple | 6 | |
| 10 | 1852416-1 | Nipple | Threaded steel pipe connector (nozzle) R 1/4 NW4 4 MPa | 8 |
| 11 | 1852417-1 | Nipple | 4 | |
| 12 | 18531924-2 | Sealing | 2 | |
| 13 | 18539190-701 | Tape, sealing strip | 2 | |
| 14 | 18539190-703 | Sealing Tape | 2 | |
| 16 | 1CSA10225-1 | Braided packing | Steel braided gasket | 8 |
| 17 | 1CSA10225-1 | Braided packing | Steel braided gasket | 8 |
| 18 | 1CSA13519-1 | Hose | Steel-reinforced rubber hose, without fittings | 4 |
| 19 | 1CSA13519-1 | Hose | Steel-reinforced rubber hose, without fittings | 4 |
| 20 | 1CSA13612-1 | Brush | 4 | |
| 21 | 1CSA16485-1 | Hose | 8 | |
| 22 | 1CSA20707-1 | Lashing wire | 2 | |
| 22 | 1CSA7988-1 | Hose | Steel-reinforced rubber hose, without fittings | 5 |
| 24 | 1CSA7988-1 | Hose | Steel-reinforced rubber hose, without fittings | 5 |
| 25 | 1CSA8130-1 | Sleeve | for tester | 40 |
| 26 | 1CSA8133-1 | Coupling | 2 | |
| 27 | 1CSA8135-1 | Nipple | 6 | |
| 28 | 1CSA8136-1 | Nut | Compression nut for fitting. | 6 |
| 29 | 1CSA8257-1 | Gasket | 10 | |
| 30 | 1CSA8258-1 | Gasket | 34 | |
| 31 | 1CSA8261-1 | Coupling | Tee (connector for pvc pipe 6 mm) | 4 |
| 32 | 1CSA8262-1 | Coupling | Connector (connector for pvc pipe 6 mm) | 4 |
| 33 | 1CSA8263-1 | Coupling | Straight connector (connector for pvc pipe 6 mm) | 4 |
| 34 | 2035929-2 | Pipe connector | 4 | |
| 35 | 21517002-162 | Lock washer | 12 | |
| 36 | 21517002-175 | Lock washer | 32 | |
| 37 | 21517002-195 | Washer | 106 | |
| 38 | 21517002-197 | Washer | 12 | |
| 39 | 21528011-1 | Gasket rubber | 8 | |
| 40 | 22110348-4 | Bearing pad | bearing seal/steel/ | 4 |
| 41 | 22110348-7 | Bearing bush | bearing bushing/steel/ | 4 |
| 44 | 2219300-4 | Bearing insulation | insulation/protection/bearings/teflon/ | 8 |
| 45 | 2219300-5 | Bearing insulation | insulation/protection/bearings/teflon/ | 4 |
| 46 | 2219303-4 | Hose | 16 | |
| 47 | 2415046-2 | Gasket | 6 | |
| 48 | 2420018-D | Guide vane No 2, boroscope | 2 | |
| 49 | 2420027-C | Guide vane No 3, boroscope | 2 | |
| 50 | 2420050-1 | Shim Washer | 240 | |
| 51 | 2420137-1 | Lock plate blade 1 | 12 | |
| 52 | 2420139-1 | Lock plate blade 2 | 12 | |
| 53 | 2420141-1 | Lock plate blade 3 | 12 | |
| 54 | 2420143-1 | Sealing Blade 2 | 190 | |
| 55 | 2420144-1 | Sealing blade 3 | 150 | |
| 56 | 2420211-1 | Sealing Seal strip | 30 | |
| 57 | 2420212-1 | Sealing E-sealing | 2 | |
| 58 | 2420470-4 | Plate Outer vane plate | 50 | |
| 59 | 2420475-1 | Sealing Outer seal strip | 116 | |
| 60 | 2420476-1 | Sealing Inner seal strip | 116 | |
| 61 | 2420477-1 | Sealing Seal strip | 60 | |
| 62 | 2420490-1 | Lock nut Of steel | 20 | |
| 63 | 2420492-4 | Plate Inner vane plate | 50 | |
| 64 | 2420534-1 | Sealing Outer sealstrip | 114 | |
| 65 | 2420536-1 | Sealing Outer sealstrip | 60 | |
| 66 | 2420702-1 | Lock washer (folded) | 66 | |
| 67 | 2420702-2 | Lock washer (folded) | 56 | |
| 68 | 2420703-1 | Retaining ring | 110 | |
| 69 | 2420703-2 | Retaining ring | 110 | |
| 70 | 2420708-1 | Lock washer | 210 | |
| 71 | 2420792-1 | Gasket | 120 | |
| 72 | 2421172-C | Guide vane 3, temp. meas. | 4 | |
| 73 | 2421227-1 | Gasket | 4 | |
| 74 | 2421235-1 | Gasket | 32 | |
| 75 | 2421283-1 | Gasket Square gasket | 4 | |
| 76 | 2421284-1 | Gasket Square gasket | Steel gasket, square-shaped | 4 |
| 77 | 2421466-1 | Gasket | Steel gasket | 8 |
| 78 | 2421514-1 | Gasket | Steel gasket | 4 |
| 79 | 2421514-2 | Gasket | Steel gasket | 4 |
| 80 | 2421910-1 | Spacer ring | Steel spacer ring | 60 |
| 81 | 2421910-2 | Spacer ring | Steel spacer ring | 60 |
| 82 | 2421910-3 | Spacer ring | Steel spacer ring | 60 |
| 83 | 2421910-4 | Spacer ring | Steel spacer ring | 60 |
| 84 | 2422868-1 | Gasket Armco | Steel gasket | 4 |
| 85 | 2422868-2 | Gasket Armco | Steel gasket | 8 |
| 86 | 2422868-3 | Gasket Armco | Steel gasket | 2 |
| 87 | 2422868-5 | Gasket Armco | Steel gasket | 16 |
| 88 | 2422868-6 | Gasket Armco | Steel gasket | 12 |
| 89 | 2422868-7 | Gasket Armco | Steel gasket | 2 |
| 90 | 2422909-A | Guide vane no. 3 machined | 100 | |
| 91 | 2422954-A | Guide vane Turb.guide vane2 | The guide blade of the 2nd stage, part of the turbine SGT-800 | 98 |
| 92 | 2423108-2 | Gasket | The guide blade of the 2nd stage, part of the turbine SGT-800, to stabilize and equalize the flow of incoming gas, is an integral part of the stator of the power turbine SGT800 | 2 |
| 93 | 2423255-1 | Sealing Inner seal strip | Steel sealing strip | 114 |
| 94 | 2423313-1 | Heat shield | The heat shield, part of the SGT-800 turbine, is part of the stator of the SGT-800 gas turbine, designed to protect the stator above the upper part of the rotor blade from the temperature effects exerted by the flow of working gases | 100 |
| 95 | 2423340-1 | Sealing Rear seal strip | Sealing strip steel 1 guide | 60 |
| 96 | 2423463-1 | Sealing Inner sealstrip | 60 | |
| 97 | 2423483-A | Guide vane Vane 1 Complete | The guide blade of the 1st stage, part of the turbine SGT-800, for stabilizing and leveling the flow of incoming gas, is an integral part of the stator of the power turbine SGT800 | 100 |
| 98 | 2423585-1 | Sealing blade 1 | 190 | |
| 99 | 2423587-1 | Lock plate blade1 | Rotor blade locking plate No. 1 | 6 |
| 100 | 2423623-1 | Sealing ring C-seal | Sealing ring C-seal | 2 |
| 101 | 2423623-2 | Sealing ring C-seal | Sealing ring C-seal | 4 |
| 102 | 2423623-3 | Sealing ring C-seal | Sealing ring C-seal | 10 |
| 103 | 2423682-A | Guide vane No 2, Temp (set) | The guide blade 2, a temporary part of the turbine SGT-800, for converting the energy of the incoming gas stream into the rotational energy of the turbine rotor, is an integral part of the rotor of the power turbine SGT800 | 4 |
| 104 | 2423699-H | Combustor | 2 | |
| 105 | 2424155-1 | Sealing | 190 | |
| 106 | 2424253-B | Set of turbine blades (87 pcs) | 2 | |
| 107 | 2424254-A | Turbine blade | 2 | |
| 108 | 2424255-1 | Turbine blade | 2 | |
| 109 | 2424285-1 | Sealing ring | Sealing ring | 466 |
| 110 | 2425146-1 | Sealing | 280 | |
| 111 | 2423560-A | Burner | 60 | |
| 112 | 2425772-1 | Washer | 12 | |
| 113 | 2591038-1 | Air filter | Instrument air cleaning filter (air filter) in air supply system of gas turbine plant, consists of plastic base in the form of cylinder and foam insert, using mechanical cleaning method | 8 |
| 114 | 3820538-1 | Pipe connector Qvick- | Steel pipe connector (single pipe) 4MPa with internal thread | 20 |
| 115 | 3820538-3 | Pipe connector | Steel pipe connector (connecting tube) 4MPa with internal thread | 4 |
| 116 | 3BSM000248-1 | Diode | Diode | 12 |
| 117 | 3BSM000249-1 | Thyristor | Thyristor | 4 |
| 118 | 3BSM000313-A | Measuring module | Measuring module for determination of gross and maximum one-time emissions of pollutants into the atmosphere during operation of gas turbines | 2 |
| 119 | 3BSM001840 | Gasket | 16 | |
| 120 | 3BSM006601-1 | Cooler | 2 | |
| 122 | 3BSM007334-A | Shaft sealing - set of spares | The set for shaft sealing consists of: seal (steel) - 1 pc., gasket (steel) - 1 pc., steel guide - 1 pc. | 8 |
| 123 | 3BSM011092-1 | Grounding tool | 2 | |
| 125 | 3BSM013161-1 | Hose | 12 | |
| 126 | 4395917-2 | Brush holder | 2 | |
| 128 | 5695418-29 | Resistance ther. det. rtd PT 100 ohm | For generator | 2 |
| 129 | 5695420-7 | Temperature transducer | For generator | 2 |
| 130 | 66770037-B | Heater | 2 | |
| 131 | 66770037-C | Heating element | 2 | |
| 132 | 70006131-A | Pipe connector | Steel pipe connector (connecting tube) 4MPa, smooth | 4 |
| 133 | 70006131-B | Pipe connector | Steel pipe connector (connecting tube) 4MPa, smooth | 4 |
| 134 | 70006131-C | Pipe connector | Steel pipe connector (connecting tube) 4MPa, smooth | 2 |
| 135 | 70006131-D | Pipe connector | Steel pipe connector (connecting tube) 4MPa, smooth | 4 |
| 136 | 70006131-E | Pipe connector | Steel pipe connector (connecting tube) 4MPa, smooth | 2 |
| 137 | A0102154-54 | Retaining ring | Steel retaining ring | 456 |
| 138 | A043R6463080 | Strip punched band | Perforated 10M tape, steel | 9 |
| 139 | A043R6463080 | Strip punched band | Perforated 10M tape, steel | 9 |
| 140 | A1551160-11 | Drying paper | Synthetic wiping material | 7 |
| 141 | A1551160-12 | Tape | Self-adhesive masking paper tape 25 mm | 6 |
| 142 | A1551160-14 | Tape | Rubberized tape (non-porous rubber reinforced with synthetic fabric), width 38 mm, length 5 m, thickness 2 mm | 10 |
| 143 | A1552154-83 | Lock washer | 14mm locking steel washer | 12 |
| 144 | A1552154-86 | Lock washer with two tabs | 16mm steel washer | 20 |
| 145 | A1554944-3 | Storage, non-re-chargeable | Battery not rechargeable, alkaline, 1.5V LR6 | 20 |
| 146 | A1554944-8 | Battery | Battery not rechargeable, alkaline, LR03 | 20 |
| 147 | A1556846-35 | Grinding material | Sandpaper 100 | 40 |
| 148 | A1556846-36 | Grinding material | Lapping material KORN 180 (sandpaper) | 20 |
| 149 | A1556846-37 | Grinding material | Sandpaper 220 | 20 |
| 150 | A1556860-12 | Wall brush mottler | End brush for spot painting | 10 |
| 151 | A1556950-38 | Refuse sack | Container 160 liters, for garbage (non-food waste bag, polyethylene) | 40 |
| 152 | A2441176-48 | Artline Paint Marker 400 XF | Plastic marker | 10 |
| 153 | A2802152-647 | Sealing tape | Steel sealing tape B = 8mm, L = 8 m/Ru, with rolling treatment | 4 |
| 154 | A3496860-41 | Textiles, other | Synthetic wiper (158 x 224 fabric) | 40 |
| 155 | A4431160-63 | Tape | Sealing tape for thread, Teflon, single layer, thickness 0.2 mm, rectangular, in rolls, with vertical edge without protrusions | 2 |
| 156 | A606E0754113 | Tape | Self-adhesive insulation tape 10 m x 19 mm x 0.22 mm, in a roll, made of plasticized polyvinyl chloride, for insulation of electrical connections | 10 |
| 157 | A606E1516082 | Connection material | Plastic connector | 400 |
| 158 | A7761320-17 | Cable strip | Plastic clamp for fixing cables, size 4.6 x 200 mm | 200 |
| 159 | A8212962-21 | Deposit box | Plastic container (box) for storing plastic markers, no tray, white color, size 200 x 350 x 80 mm | 30 |
| 160 | A8212962-22 | Deposit box | Plastic container (box) for storing plastic markers, no tray, white color, size 200 x 350 x 80 mm | 70 |
| 161 | A8212962-23 | Deposit box | Plastic container (box) for storing plastic markers, no tray, white color, size 200 x 350 x 80 mm | 30 |
| 162 | T1253-239 | Split pin | Steel pin 14 mm | 8 |
| 163 | T1665-542 | Hexagon head bolt | Hexagon head bolt, diameter 14mm, steel | 20 |
| 164 | T1873-538 | Hexagon sockethead screw large clearance | 16mm High Clearance Hexagon Head Screw | 28 |
| 165 | T3622-178 | Washer | 13mm locking steel washer | 16 |
| 166 | T3623-173 | Washer | 14mm locking steel washer | 8 |
| 167 | T3704-108 | Point gasket | Steel connecting gasket | 10 |
| 168 | T3706-133 | Gasket metal sheeted | Metallized steel gasket | 6 |
| 169 | T3706-138 | Gasket | Steel gasket | 2 |
| 170 | T3711-315 | Sheet gasket | Non-porous rubber sheet gasket | 4 |
| 171 | T3711-319 | Sheet gasket | Flat gasket, cardboard | 12 |
| 172 | T3712-220 | Sheet gasket acc. to EN | Steel plate gasket | 16 |
| 173 | T3712-221 | Sheet gasket acc. to EN | Plate gasket 141x192x1 steel | 14 |
| 174 | T3712-222 | Sheet gasket | Steel plate gasket | 32 |
| 175 | T3712-224 | Sheet gasket | Steel gasket | 8 |
| 176 | T3712-225 | Sheet gasket | Steel gasket | 2 |
| 177 | T3712-226 | Sheet gasket | Plate gasket DN300/PN16 steel | 2 |
| 178 | T3712-314 | Gasket | 12 | |
| 179 | T3712-317 | Sheet gasket acc. to EN | Steel plate gasket | 4 |
| 180 | T3712-318 | Sheet gasket acc. to EN | Steel plate gasket | 6 |
| 181 | T3712-324 | Sheet gasket | Plate gasket DN200/PN40 steel | 2 |
| 182 | T3725-179 | Gasket | Steel gasket | 16 |
| 183 | T3904-173 | Lock washer | Locking washer, diameter 14 mm, steel | 80 |
| 184 | T3904-174 | Lock washer Bright galvanize | 248 | |
| 185 | T3904-178 | Locking washer | Locking washer, diameter 14 mm, steel | 334 |
| 186 | T3905-165 | Lock washer (folded) | Locking washer M14 (diameter 14 mm), steel | 110 |
| 187 | T3905-178 | Lock washer (folded) | Locking washer M16 (diameter 16 mm), steel | 1644 |
| 188 | T3905-186 | Lock washer Stainless steel | Locking washer stainless steel 13 mm | 30 |
| 189 | T3907-153 | Lock washer | Locking washer M16 (diameter 16 mm), steel | 16 |
| 190 | T3907-165 | Lock washer | Locking washer 14 mm steel | 20 |
| 191 | T3907-178 | Lock washer | Locking washer, diameter 14 mm, steel | 1412 |
| 192 | T3907-179 | Lock washer Nordlock | Locking washer 13mm steel | 322 |
| 193 | T3907-186 | Lock washer | Locking washer M16 (diameter 16 mm), steel | 1474 |
| 194 | T3907-192 | Lock washer | Locking washer M20 (diameter 20 mm), steel | 214 |
| 195 | T3910-173 | Lock washer (folded) | Locking washer M16 (diameter 16 mm), steel | 8 |
| 196 | T3910-179 | Lock washer (folded) | Locking washer, diameter 14 mm, steel | 62 |
| 197 | T3910-185 | Lock washer (folded) | Locking washer (bent) 17mm, steel | 130 |
| 198 | T3910-204 | Lock washer (folded) | Locking washer, 31X63X1,5, steel | 6 |
| 199 | T6102-101 | Union nut | Connecting nut, diameter 14 mm, steel | 10 |
| 200 | T6313-101 | Plug | Stainless steel threaded pipe connector, 4 MPa | 4 |
| 201 | T6815-102 | Pipe connector | Connecting tube (pipe connector) steel, smooth, 4 MPa | 4 |
| 202 | T6815-802 | Pipe connector | Stainless steel threaded pipe connector, 4 MPa | 4 |
| 203 | T6820-102 | Pipe coupling, straight | Steel coupling, smooth, 4 MPa | 4 |
| 204 | T6830-101 | Union | Sleek steel (fitting) pipe joint for insertion, maximum pressure 4MPa, stainless steel | 2 |
| 205 | T6870-101 | Tee connector | Smooth steel T-joint | 2 |
| 206 | T7021-101 | Ferrule | Ring, steel | 10 |
Contact: Hangzhou Gas Turbine Parts Co.Ltd
Phone: 15869109368
Tel: 86-571-89967020
E-mail: saels@gas-turbine-parts.com
Add: No151,ZiDingXiang Road Hangzhou City ZheJiang China 310021